Botou Huaying Environmental Protection Equipment Co

Type cyclone dust collector manufacturer quality assurance product introduction
Huaying type cyclone dust collector is composed of three parts: a cyclone cylinder, an ash collecting hopper and a volute (or wind collecting cap). It is distinguished by the number of cylinders. There are single cylinders , double-tube, three-tube, four-tube, six-tube and other five combinations, each combination has two air outlet forms: horizontal air outlet and air outlet (upper air outlet). For double-tube combinations, there are two combinations: center air inlet and outlet and side air inlet and outlet. Single-tube and three-tube combinations only have side air inlet and outlet. Four-tube and six-tube combinations only have center air inlet and outlet. For various combinations of types, any air inlet position of the above types can be used. This type of cyclone dust collector has the characteristics of small resistance, high dust removal efficiency, large air volume, stable performance, small floor space, simple structure, practicality and low cost, etc. Features. It is suitable for coarse and medium-level purification of dust in mechanical processing, metallurgical building materials, and mining. [
Zhang Yan]
Type cyclone dust collector technical description:
Type cyclone dust collector is based on the diameter of the cylinder, and has a total of ￠3-￠ specifications, and every interval is one level. According to the number of cylinders, there are single-cylinder, double-cylinder, three-cylinder, four-cylinder and six-cylinder combinations. Each combination has two exhaust types, one is horizontal (side) exhaust (type), generally used for negative pressure operation, and the other is upper (center) exhaust (type), used for positive or negative pressure operate. For the double-barrel combination, there are two types of combinations: center intake and exhaust and side intake and exhaust. Single-tube and three-tube combinations only have side intake and exhaust. Four-tube and six-tube combinations only have center intake and exhaust. For various combinations of models, any air inlet position in the model can be used. The cylinder and volute have two types: right-hand rotation and left-hand rotation. During installation, the intake and exhaust can be assembled in different directions of rotation. The single-cylinder combination of the ash discharge device is equipped with a conical flashing valve, and the other four combinations are equipped with a rotary discharger. Flange gaskets are selected according to different working gas temperatures. Asbestos rubber gaskets are used when the temperature is greater than ℃, and rubber gaskets are used when the temperature is less than ℃. After assembly, an air pressure test of no less than 100 ℃ should be performed to ensure that it is airtight and airtight.
Botou Huaying Environmental Protection Equipment Co., Ltd. specializes in the production of various dust removal equipment and dust removal accessories. Manufacturers are welcome to discuss cooperation and learn more about product information
Please call: Zhang Yan
: